RAMPA KNOCK-IN INSERTS TYPE TSZ
Product information "RAMPA KNOCK-IN INSERTS TYPE TSZ"
RAMPA knock-in inserts type TSZ with continous internal thread and four strong pikes on the shank for strong hold without torsion.
Product attachments "RAMPA KNOCK-IN INSERTS TYPE TSZ"
Login
Accessories
RAMPA MUSHROOMHEAD SCREWS TYPE KT
RAMPA mushroom head screws type KT with hex drive and decorative head for visible joints.
RAMPA COUNTERSUNK SCREWS TYPE KS
RAMPA countersunk screws type KS (comply tiwh DIN 7991) with hex drive and decorative countersunk head for visible joints.
RAMPA FLAT HEAD SCREWS TYPE KF
RAMPA flat head screws type KF with hex drive and decorative head for visible joints.
Cutsomers also bought
RAMPA INSERTS TYPE C
RAMPA inserts type C with slot have the same outer diameter as type A and B, but the inner thread is proportionally larger (thin-walled).
RAMPA INSERTS TYPE SKD30
RAMPA inserts type SKD30 with sealing collar, hex drive, unthreaded lead and patented 1-start external thread contour for simplified assembling in wood, wood-based materials and thermoplastics.
RAMPA DRIVER TYPE 507
RAMPA driver type 507 with shank according DIN 3126-Form E 6,3. For assembling slotted RAMPA inserts (not to be used for type C and type CA). Only to be used with original RAMPA inserts.
RAMPA KNOCK-IN INSERTS TYPE TSZ
RAMPA knock-in inserts type TSZ with continous internal thread and four strong pikes on the shank for strong hold without torsion.
RAMPA DRIVER TYPE 506
RAMPA driver type 506 with shank according DIN 3126-Form E 6,3 for assembling RAMPA inserts via hex drive. Only to be used with original RAMPA inserts.
Similar products
RAMPA KNOCK-IN INSERTS TYPE TS
RAMPA knock-in inserts type TS with collar, continuous internal thread and knurled shank. Enables reliable positioning in the assembly process.
RAMPA KNOCK-IN INSERTS TYPE TSZ
RAMPA knock-in inserts type TSZ with continous internal thread and four strong pikes on the shank for strong hold without torsion.
RAMPA KNOCK-IN INSERTS TYPE TSBZ
RAMPA knock-in inserts type TSBZ produced by zinc die casting process with collar and strong spikes on the shank for strong hold without torsion. Note: Zinc die-cast parts have decreasing retention forces and a shortened product life cycle.
RAMPA KNOCK-IN INSERTS TYPE TSLZ
RAMPA knock-in inserts type TSLZ produced by zinc die casting process with collar and spikes on the shank for strong hold without torsion. Note: Zinc die-cast parts have decreasing holding forces and a shortened product life cycle.
RAMPA KNOCK-IN INSERTS TYPE TS3L
RAMPA knock-in inserts type TS3L with three fixing holes (Ø 3 mm) for additional securing with e.g. screws or nails.