RAMPA KNOCK-IN INSERTS TYPE TSLZ
Product information "RAMPA KNOCK-IN INSERTS TYPE TSLZ"
RAMPA knock-in inserts type TSLZ produced by zinc die casting process with collar and spikes on the shank for strong hold without torsion. Note: Zinc die-cast parts have decreasing holding forces and a shortened product life cycle.
Product attachments "RAMPA KNOCK-IN INSERTS TYPE TSLZ"
Login
Accessories
RAMPA MUSHROOMHEAD SCREWS TYPE KT
RAMPA mushroom head screws type KT with hex drive and decorative head for visible joints.
Cutsomers also bought
RAMPA INSERTS TYPE SKD330
RAMPA inserts type SKD330 with sealing collar, hex drive, unthreaded lead and patented 3-start thread contour for tilt protection and quicker assembly. Highest possible pull-out values in various wood, wood-based materials and thermoplastics.
RAMPA INSERTS TYPE E
RAMPA inserts type E with slot for wood (from 750 kg / m³ raw density) and plastic applications.
RAMPA INSERTS TYPE SKD30
RAMPA inserts type SKD30 with sealing collar, hex drive, unthreaded lead and patented 1-start external thread contour for simplified assembling in wood, wood-based materials and thermoplastics.
Similar products
RAMPA KNOCK-IN INSERTS TYPE TS
RAMPA knock-in inserts type TS with collar, continuous internal thread and knurled shank. Enables reliable positioning in the assembly process.
RAMPA KNOCK-IN INSERTS TYPE TSZ
RAMPA knock-in inserts type TSZ with continous internal thread and four strong pikes on the shank for strong hold without torsion.
RAMPA KNOCK-IN INSERTS TYPE TSBZ
RAMPA knock-in inserts type TSBZ produced by zinc die casting process with collar and strong spikes on the shank for strong hold without torsion. Note: Zinc die-cast parts have decreasing retention forces and a shortened product life cycle.
RAMPA KNOCK-IN INSERTS TYPE TSLZ
RAMPA knock-in inserts type TSLZ produced by zinc die casting process with collar and spikes on the shank for strong hold without torsion. Note: Zinc die-cast parts have decreasing holding forces and a shortened product life cycle.
RAMPA KNOCK-IN INSERTS TYPE TS3L
RAMPA knock-in inserts type TS3L with three fixing holes (Ø 3 mm) for additional securing with e.g. screws or nails.