RAMPA KNOCK-IN INSERTS TYPE TS
Product information "RAMPA KNOCK-IN INSERTS TYPE TS"
RAMPA knock-in inserts type TS with collar, continuous internal thread and knurled shank. Enables reliable positioning in the assembly process.
Manufacturer Information:
RAMPA GmbH & Co. KG
Auf der Heide 8
21514 Büchen
Germany
E-Mail: mail@rampa.com
Product attachments "RAMPA KNOCK-IN INSERTS TYPE TS"
Product 3D model "RAMPA KNOCK-IN INSERTS TYPE TS"
Login
Accessories
RAMPA FLAT HEAD SCREWS TYPE KF
RAMPA flat head screws type KF with hex drive and decorative head for visible joints.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA MUSHROOMHEAD SCREWS TYPE KT
RAMPA mushroom head screws type KT with hex drive and decorative head for visible joints.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA COUNTERSUNK SCREWS TYPE KS
RAMPA countersunk screws type KS (comply tiwh DIN 7991) with hex drive and decorative countersunk head for visible joints.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
Cutsomers also bought
RAMPA KNOCK-IN INSERTS TYPE TS
RAMPA knock-in inserts type TS with collar, continuous internal thread and knurled shank. Enables reliable positioning in the assembly process.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA INSERTS TYPE E SHORT
RAMPA insert type E without slot and with a length of only 4.8 mm for HPL / compact boards from 6 mm board thickness.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
Similar products
RAMPA KNOCK-IN INSERTS TYPE TS
RAMPA knock-in inserts type TS with collar, continuous internal thread and knurled shank. Enables reliable positioning in the assembly process.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA KNOCK-IN INSERTS TYPE TSZ
RAMPA knock-in inserts type TSZ with continous internal thread and four strong pikes on the shank for strong hold without torsion. Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA KNOCK-IN INSERTS TYPE TSBZ
RAMPA knock-in inserts type TSBZ produced by zinc die casting process with collar and strong spikes on the shank for strong hold without torsion. Note: Zinc die-cast parts have decreasing retention forces and a shortened product life cycle.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA KNOCK-IN INSERTS TYPE TSLZ
RAMPA knock-in inserts type TSLZ produced by zinc die casting process with collar and spikes on the shank for strong hold without torsion. Note: Zinc die-cast parts have decreasing holding forces and a shortened product life cycle.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA KNOCK-IN INSERTS TYPE TS3L
RAMPA knock-in inserts type TS3L with three fixing holes (Ø 3 mm) for additional securing with e.g. screws or nails.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com