Product information "RAMPA INSERTS TYPE SK"
RAMPA inserts type SK with hex drive and an unthreaded lead for simplified screwing into wood and plastic applications.
Product attachments "RAMPA INSERTS TYPE SK"
Product 3D model "RAMPA INSERTS TYPE SK"
Login
Accessories
RAMPA DRIVER TYPE 515
RAMPA driver type 515 with high workload ball bearing for assembling RAMPA inserts via the internal thread. Only to be used with original RAMPA inserts.
RAMPA FLAT HEAD SCREWS TYPE KF
RAMPA flat head screws type KF with hex drive and decorative head for visible joints.
RAMPA COUNTERSUNK SCREWS TYPE KS
RAMPA countersunk screws type KS (comply tiwh DIN 7991) with hex drive and decorative countersunk head for visible joints.
RAMPA MUSHROOMHEAD SCREWS TYPE KT
RAMPA mushroom head screws type KT with hex drive and decorative head for visible joints.
RAMPA DRIVER TYPE 506
RAMPA driver type 506 with shank according DIN 3126-Form E 6,3 for assembling RAMPA inserts via hex drive. Only to be used with original RAMPA inserts.
Cutsomers also bought
RAMPA INSERTS TYPE SKD330
RAMPA inserts type SKD330 with sealing collar, hex drive, unthreaded lead and patented 3-start thread contour for tilt protection and quicker assembly. Highest possible pull-out values in various wood, wood-based materials and thermoplastics.
RAMPA INSERTS TYPE SK
RAMPA inserts type SK with hex drive and an unthreaded lead for simplified screwing into wood and plastic applications.
RAMPA INSERTS TYPE SK330
RAMPA inserts type SK330 with hex drive, unthreaded lead and patented 3-start external thread for tilt protection and quicker assembly. Highest possible pull-out values in various woods, wood-based materials and thermoplastics.
RAMPA COUNTERSUNK SCREWS TYPE KS
RAMPA countersunk screws type KS (comply tiwh DIN 7991) with hex drive and decorative countersunk head for visible joints.
RAMPA INSERTS TYPE SKD
RAMPA inserts type SKD with sealing collar, hex drive and unthreaded lead for assembling in wood, wood-based materials and thermoplastics.
Similar products
RAMPA INSERTS TYPE ES
RAMPA inserts type ES with wide cutting slot. Facilitates assembly into harder materials such as thermosetting plastics and thermoplastics, light metal alloys and cast steel applications.
RAMPA INSERTS TYPE E SHORT
RAMPA insert type E without slot and with a length of only 4.8 mm for HPL / compact boards from 6 mm board thickness.
RAMPA INSERTS TYPE E
RAMPA inserts type E with slot for wood (from 750 kg / m³ raw density) and plastic applications.
RAMPA INSERTS TYPE D
RAMPA inserts type D with slot and with sealing collar on the slotted end. Suitable for e.g. seat shells made of multiplex materials.
RAMPA INSERTS TYPE SK
RAMPA inserts type SK with hex drive and an unthreaded lead for simplified screwing into wood and plastic applications.