RAMPA INSERTS TYPE E
Product information "RAMPA INSERTS TYPE E"
RAMPA inserts type E with slot for wood (from 750 kg / m³ raw density) and plastic applications.
Product attachments "RAMPA INSERTS TYPE E"
Product 3D model "RAMPA INSERTS TYPE E"
Login
Accessories
RAMPA MUSHROOMHEAD SCREWS TYPE KT
RAMPA mushroom head screws type KT with hex drive and decorative head for visible joints.
RAMPA DRIVER TYPE 515
RAMPA driver type 515 with high workload ball bearing for assembling RAMPA inserts via the internal thread. Only to be used with original RAMPA inserts.
Cutsomers also bought
RAMPA INSERTS TYPE E
RAMPA inserts type E with slot for wood (from 750 kg / m³ raw density) and plastic applications.
RAMPA INSERTS TYPE BAS
RAMPA inserts type BAS with three cutting blind holes (space for wood chips) in external thread. Dimensionally stable cutting into extremly hard materials such as thermosetting plastics and thermoplastics, light metal alloys and cast steel applications.
RAMPA ROSETTES TYPE UZ
RAMPA rosettes type UZ according to DIN 7984 and to accommodate cylinder head screws (e.g. RAMPA screws type KC).
RAMPA INSERTS TYPE SK330
RAMPA inserts type SK330 with hex drive, unthreaded lead and patented 3-start external thread for tilt protection and quicker assembly. Highest possible pull-out values in various woods, wood-based materials and thermoplastics.
RAMPA KNOCK-IN INSERTS TYPE TS3L
RAMPA knock-in inserts type TS3L with three fixing holes (Ø 3 mm) for additional securing with e.g. screws or nails.
Similar products
RAMPA INSERTS TYPE ES
RAMPA inserts type ES with wide cutting slot. Facilitates assembly into harder materials such as thermosetting plastics and thermoplastics, light metal alloys and cast steel applications.
RAMPA INSERTS TYPE E SHORT
RAMPA insert type E without slot and with a length of only 4.8 mm for HPL / compact boards from 6 mm board thickness.
RAMPA INSERTS TYPE E
RAMPA inserts type E with slot for wood (from 750 kg / m³ raw density) and plastic applications.
RAMPA INSERTS TYPE D
RAMPA inserts type D with slot and with sealing collar on the slotted end. Suitable for e.g. seat shells made of multiplex materials.
RAMPA INSERTS TYPE SK
RAMPA inserts type SK with hex drive and an unthreaded lead for simplified screwing into wood and plastic applications.