RAMPA INSERTS TYPE B
Product information "RAMPA INSERTS TYPE B"
RAMPA inserts type B (similar to DIN 7965) slotted and with full internal thread. Suitable for automated assembly.
Product attachments "RAMPA INSERTS TYPE B"
Login
Accessories
RAMPA MUSHROOMHEAD SCREWS TYPE KT
RAMPA mushroom head screws type KT with hex drive and decorative head for visible joints.
RAMPA DRIVER TYPE 507
RAMPA driver type 507 with shank according DIN 3126-Form E 6,3. For assembling slotted RAMPA inserts (not to be used for type C and type CA). Only to be used with original RAMPA inserts.
RAMPA DRIVER TYPE 515
RAMPA driver type 515 with high workload ball bearing for assembling RAMPA inserts via the internal thread. Only to be used with original RAMPA inserts.
RAMPA FLAT HEAD SCREWS TYPE KF
RAMPA flat head screws type KF with hex drive and decorative head for visible joints.
RAMPA COUNTERSUNK SCREWS TYPE KS
RAMPA countersunk screws type KS (comply tiwh DIN 7991) with hex drive and decorative countersunk head for visible joints.
Cutsomers also bought
RAMPA FLAT HEAD SCREWS TYPE KF
RAMPA flat head screws type KF with hex drive and decorative head for visible joints.
RAMPA CAP NUTS TYPE RFL
RAMPA cap nuts type RFL with hex drive, blind hole and decorative flat head for visible joints.
RAMPA CROSS DOWELS TYPE Q
RAMPA cross dowels type Q with slot for high load capacities e.g. for frames and corner connections. Allows the transmission of large forces over a large surface area in the material.
RAMPA DRIVER TYPE 515
RAMPA driver type 515 with high workload ball bearing for assembling RAMPA inserts via the internal thread. Only to be used with original RAMPA inserts.
Similar products
RAMPA INSERTS TYPE ES
RAMPA inserts type ES with wide cutting slot. Facilitates assembly into harder materials such as thermosetting plastics and thermoplastics, light metal alloys and cast steel applications.
RAMPA INSERTS TYPE E
RAMPA inserts type E with slot for wood (from 750 kg / m³ raw density) and plastic applications.
RAMPA INSERTS TYPE E SHORT
RAMPA insert type E without slot and with a length of only 4.8 mm for HPL / compact boards from 6 mm board thickness.
RAMPA INSERTS TYPE D
RAMPA inserts type D with slot and with sealing collar on the slotted end. Suitable for e.g. seat shells made of multiplex materials.
RAMPA INSERTS TYPE SK
RAMPA inserts type SK with hex drive and an unthreaded lead for simplified screwing into wood and plastic applications.